Tactrix Openport 2. Note:This cable doesn't work as a standalone device, you must connect it to your laptop with the Tango key programmer to use it. This cable is also for all things Evo5, Evo 6 and Evo 6.5 vehicles (including datalogging and reflashing). The Tactrix Openport 2.0 had been successfully tested with the following software: Chiploader, MMC Flasher, Multiflasher, PCM Flash, Toyota Techstream, and many others. Description This OpenPort 2.0 cable Product is for all things Lancer Evo 10 (EvoX), Lancer Ralliart, and Lancer Sportback. The Openport 2.0 adapter works with all Tango smart key SLK emulators, it will allow you to make keys when all the keys are lost, You can follow Tango Toyota+ steps for more details. The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer for Subaru and for Mitsubishi vehicles. The Tactrix Openport 2.0 is used as a J2534 interface with the Tango key programmer to read Toyota, Lexus & Subaru Immobilizer data from Smart ID Box and write the smart key data by Tango SLK emulator. The Tactrix Openport OBD Adapter is tuning tool hardware that is capable of communicating with most OBDII-compliant vehicles using a standard J2534 interface. Depending on the ECU map you will choose, it will enable you to manually configure numerous parameters such as throttle duty limits for each gear, gear ratios, rev limits, engine load limits, fuel injector settings, and much more. Tactrix Openport 2.0 OBD adapter overview: Thanks to its fast 72Mhz 32-bit processor, the Tactrix Openport 2.0 will not burden your PC while communicating with your car s ECU.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |